Components for the simple slitting machine line: This line includes Uncoiler, Feeding Guide, Slitting Machine, Cantilevering Separating, Tension Control Board, Console and general electrical equipment.

Technical parameter of simple slitting machine line:
Material of processible coiled plate: Apply for carbon steel plate δ B≤ 700Mpa;
Thickness of coiled plate: δ =0.4_2mm;
Width of coiled plate: Slitting 1250mm;
Precision of slitting: Width tolerance: ± 0.02mm;
Slitting speed: 0_40m/min;
Loading capacity of uncoiler machine(feeding machine): 5T;

Coil I. D: 450-510mmmm;
Coil O. D: ≤ 1500mm;
Max Strips: 10 PCS.
Min. Strip Width: 70mm.
Knife pivot diameter of slitting: 120mm; Material 40Cr;
Slitting blade: 120× 220× 15; 10PCS
Material of slitting blade: 9CrSi;
Hardness of blade: HRC58_60 degrees;

Recoiler I. D: 508mm;
Power: 380V/3pH/50Hz;
The main components & damageable component in electronic equipments is accordance with GB stipulation;
Overall Dimmension: 12000mmx4500mm (LXW).
Total Power: 48KW

Specifics details for simple slitting machine line:
Uncoiler: Loading capacity of: 5T
This is composed of bottom stand, frame, conical discharging tray, manual pushing machine, etc.
Guiding (peer to peer) device
This is composed of worktable frame, guiding pole, adjustment device, moveable plane plate, etc.

Slitting machine
Power part: This is composed of power-stand, decelerator, motor: 11KW, gear distributing case, coupler, spindle, connecting-cover, etc.
Host machine: This is composed of bottom-stand, fixed torii, , knife pivot(φ 120mm, 2PCS), knife pivot lifting and pressing down adjustment device, accompany of blade, separating cover, rubber band.